A tailored design

The kit has been specifically developed for the NSX from the bottoms up with a purely bespoke design and selected components.

• Custom NSX spec id4 S2000-skinned digital gauge cluster from Dutch manufacturer ID4Motion. Switch between AP1, AP2 and AP2 Club Racer skins and customize the color setup using a push of a button (keypad included in the kit). The id4 cluster can be supplied with optional support for CANBUS-enabled aftermarket EMS’s and backup cameras.

• Automotive grade components in critical circuitry to provide the top quality and endurance required by automotive applications

• Professionally manufactured PCB’s for reliability and consistency in quality

• OEM connectors from Japan for a 100 % compatibility with your NSX and a Plug & Play solution

• Industry standard 3D-printed encasings specifically designed for the cluster housing environment in the NSX

• Custom made wire harness using OEM connectors and crimps from Japan

• Each kit is individually tested to ensure 100 % functionality and quality upon dispatch

• Delivers in a professional, foam filled case to ensure a safe transportation to your destination

Swapping to an all digital, modern instrument cluster such as the id4 is a popular mod for many cars for a couple of reasons:

• State-of-the-art technology means a higher performing application and higher level of customization by the push of a button. Choose between AP1, AP2 and AP2 Club Racer skins and color setup easily using the supplied keypad. Customize extra gauges and fine-tune calibration settings, it's all there easy to configure

• It features a high density of instrumentation which is especially advantageous for sport car applications, as the driver will find all information conveniently situated in a small area in the instrument panel, and thereby spends less time finding relevant information during spirited driving. Further, it supports a variety of additional optional inputs over CANBUS:

  • Fuel pressure

  • Coolant temp

  • Intake temp

  • Intake pressure

  • Mass airflow

  • Oil pressure

  • Oil temperature

  • Transmission temperature

  • Ethanol content

  • Lambda 1

  • Lambda 2

  • AFR 1

  • AFR 2

• The id4 cluster is a perfect design for NSX's with smaller diameter steering wheels, such as the popular 330 mm diameter ones. No instrumentation gets clouded by the steering wheel, forcing the driver to move his or her head to see the instrumentation at interest

• It is significantly lighter than the heave OEM NSX gauge cluster

Downloads

Installation instructions: NSX2ID4-Installation-Manual_V1.3.pdf

id4 instrument cluster specifications: Specification_Honda_S2000_instrument-cluster.pdf

Latest id4 firmware: https://id4motion.shop/pages/firmware

How to install the firmware:

Installing the updates requires an USB drive that is formatted as FAT32 with an msdos partition table. Put the update file in the root of the USB stick (not in a directory or map).

When you have the update copied to the USB stick let the vehicle run and wait with plugging in the USB stick until the cluster has fully started. The progress bar on the cluster will show you that the update is being installed. When ready you will see a green ‘check’ mentioning the software is installed successfully. Remove your USB stick and the cluster will reboot. After that let the car go to sleep fully (aproximately 1-5 minutes) and restart your car.

Your cluster is installed with the new software and you can check the version number in the internal menu.

When you don’t succeed with the update these are the most common failures:

• Try a different USB stick

• Files are not in the root of the USB stick

• There are more files (updates) on the USB stick

• Reformat the USB stick

• USB stick not connected in cluster correctly

• Cluster isn’t fully started